Vejamos no exemplo abaixo como aumentar uma partição LVM, que está dentro de uma partição Extended. No exemplo abaixo, recriaremos a partição da LVM, que deve iniciar a partir do mesmo setor antigo, ou seja, em nosso exemplo o setor inicial da nossa LVM é o 501760, sendo assim a nova partição redimensionada deve-se iniciar também no setor 501760.
root@masterdaweb:~# fdisk -l
Disk /dev/sda: 800 GiB, 858993459200 bytes, 1677721600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xac7783f0
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 499711 497664 243M 83 Linux
/dev/sda2 501758 83884031 83382274 39,8G 5 Extended
/dev/sda5 501760 83884031 83382272 39,8G 8e Linux LVM
Disk /dev/mapper/debian--vg-root: 38,1 GiB, 40907046912 bytes, 79896576 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/mapper/debian--vg-swap_1: 1,7 GiB, 1782579200 bytes, 3481600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
root@masterdaweb:~# fdisk /dev/sda
Welcome to fdisk (util-linux 2.29.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): d
Partition number (1,2,5, default 5): 2
Partition 2 has been deleted.
Command (m for help): n
Partition type
p primary (1 primary, 0 extended, 3 free)
e extended (container for logical partitions)
Select (default p):
Using default response p.
Partition number (2-4, default 2): 2
First sector (499712-1677721599, default 499712): 501760
Last sector, +sectors or +size{K,M,G,T,P} (501760-1677721599, default 1677721599):
Created a new partition 2 of type 'Linux' and of size 799,8 GiB.
Partition #2 contains a LVM2_member signature.
Do you want to remove the signature? [Y]es/[N]o: N
Command (m for help): t
Partition number (1,2, default 2): 2
Partition type (type L to list all types): 8e
Changed type of partition 'Linux' to 'Linux LVM'.
Command (m for help): w
The partition table has been altered.
Calling ioctl() to re-read partition table.
Re-reading the partition table failed.: Device or resource busy
The kernel still uses the old table. The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8).
root@masterdaweb:~# fdisk -l
Disk /dev/sda: 800 GiB, 858993459200 bytes, 1677721600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xac7783f0
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 499711 497664 243M 83 Linux
/dev/sda2 501760 1677721599 1677219840 799,8G 8e Linux LVM
Disk /dev/mapper/debian--vg-root: 38,1 GiB, 40907046912 bytes, 79896576 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Em seguida basta reiniciar a máquina para que as alterações sejam aplicadas, e então redimensionar o Physical Volume de nossa LVM:
shutdown -r now
pvresize /dev/sda2
root@masterdaweb:~# pvdisplay --- Physical volume --- PV Name /dev/sda2 VG Name debian-vg PV Size 799,76 GiB / not usable 2,00 MiB Allocatable yes PE Size 4,00 MiB Total PE 204738 Free PE 194560 Allocated PE 10178 PV UUID k7gcJz-tKRI-WZb2-Dmdo-BpMn-qANT-y7PMYY
root@masterdaweb:~# vgdisplay --- Volume group --- VG Name debian-vg System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 5 VG Access read/write VG Status resizable MAX LV 0 Cur LV 2 Open LV 2 Max PV 0 Cur PV 1 Act PV 1 VG Size 799,76 GiB PE Size 4,00 MiB Total PE 204738 Alloc PE / Size 10178 / 39,76 GiB Free PE / Size 194560 / 760,00 GiB VG UUID kXiqf9-oqdT-szRX-fNd9-utWC-ZncD-DwDooI
- Tags:
- LVM
